| Support on the fork arm: |
Stable and secure |
| Made in: |
Germany |
| With: |
Tight tolerances, noise reduction and small overall dimensions |
| Carrier: |
Safe, quick and easy entry into the respective load carrier
|
| Strenght: |
High |
| Safety: |
High level of safety as it cannot slide off unintentionally |
| Assembly: |
Simple, quick and energy-saving assembly, always correct assembly
|
| Legal security according to: |
The EC Machinery Directive (CE mark) |
| Selection notes for fork extensions (ISO 13284): |
- The fork extension must be supported by at least 60% of the existing fork prong.
- Compliance with the load capacity and load center distance of the forklift and the forks must be guaranteed.
- The load capacity of the fork extension is to be matched to the respective fork prong. |
| Dimensions: |
For fork Outside dimension
cross section [mm] tolerance +/- 3 [mm]
80 x 30/80 x 35 110 x 47/110 x 52
80 x 40 110 x 57
100 x 30/100 x 35 130 x 47/130 x 52
100 x 40 130 x 57
100 x 45 130 x 62
100 x 50 130 x 67
120 x 40 150 x 57
120 x 45/125 x 40 150 x 62/155 x 57
120 x 50/125 x 45 150 x 67/155 x 62
125 x 50 155 x 67
130 x 60 170 x 81
140 x 50 170 x 67
150 x 40/150 x 45 180 x 57/180 x 62
150 x 50 180 x 67
150 x 60/150 x 65 190 x 81/190 x 86
150 x 70/150 x 75 195 x 91/195 x 96
180 x 50 220 x 71
180 x 60 220 x 81
180 x 70 220 x 91
200 x 60 240 x 81
200 x 70 245 x 91
200 x 80 245 x 106
200 x 90 245 x 116 |
| Total length of fork extension [mm]: |
1200
1300
1400
1500
1600
1800
2000
2200
2400
2500 |
| For fork tine cross-section [mm]: |
80x30 / 80x35
80x40
100x30 / 100x35
100x40
100x45
100x50
120x40
120x45 / 125x40
120x50 / 125x45
125x50
130x60
140x50
150x40 / 150x45
150x50
150x60 / 150x65
150x70 / 150x75
180x50
180x60
180x70
200x60
200x70
200x80
200x90 |
